Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Tacx Trainer Tire 26-inch
$49.99
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
Robert Axle Project Trainer Thru Axle
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Elite Training Mat
$109.99
The Training Mat is the finishing touch to your training area. Placed between the home trainer and the floor, it improves comfort and protects your home from oil, dirt, and sweat. Plus, it limits the noise produced by training, especially on wooden floors. - Easy to roll up and store away - Dampens vibrations - Easy to clean - Length: 1800mm - Width 900mm
CycleOps Climbing Riser Block
$29.99
CycleOps' Climbing Riser Block offers 3 levels of elevation to lift your front wheel and provide a workout simulating climbing hills. For steeper climbing workouts, 2 climbing blocks (sold separately) may be placed on top of each other for many different adjustment levels.
Tacx E-Thru Trainer Axle
$44.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
Tacx Quick Release for Rear Wheel
$9.99
Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.
Strider Rocking Base
$79.99
Look, your child is destined for greatness. We won't dispute that. But, why wait until they can walk for them to rock their awesomeness? If they're crawling, they're ready to explore the world. Attach the Strider Rocking Base to a Strider 12 Bike and get them rocking. The rocking base doesn't just familiarize them with a bike, the rocking motion helps develop their balance, spatial awareness, and core strength. No batteries. No annoying sounds. Just pure, rocking fun. - Compatible with the Strider 12 Classic, Sport, and Pro Balance Bikes - When the Strider 12" Bike is attached this product is intended for ages 6 months – 5 years old for Strider Sport and Pro, and ages 6 months – 3 years for Strider Classic.
CycleOps Trainer Thru Axle Kit
$59.99
- Adapts a thru axel hub bike for a trainer. - Only compatible with current classic series trainers. - Fits most 142-148 Thru axle bikes with 1.0 or 1.75 thread pitch - Kit consists of an axle, washers, end caps with bolts and a shorter version of our bolt action slider for the classic series trainer. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems.
Saris 20/24-inch Wheel Adapter
$69.99
The Saris 20/24-inch Wheel Adapter allows you to use your BMX or recumbent bike with your trainer.
Tacx Direct Drive Freehub Body, Campagnolo
$79.99
This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes. How to place the Campagnolo Body: 1. Remove the cap with a 5-millimeter Allen key. 2. Replace the Shimano/SRAM body with the Campagnolo body. 3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.
Elite Folding Trainer Mat
$59.99
The Elite Folding Mat increases the comfort of your home cycling setup while protecting the surfaces you train on every day. It's easy to use, store, and transport and can be stored everywhere in your house. Dimensions: 1.8m x .9m
Elite Protec Plus
$59.99
Protects the bicycle from sweat and avoids corrosions or rust. - Prevents an accumulation of sweat on the frame and components that would lead to corrosion or affect the finish - Sits above the top-tube and can be adjusted for different bicycles - Washing-machine friendly
Tacx Trainer Adapter for X-12 Axle
$59.99
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.
CycleOps Q-Synce Multiremote
$79.99
- Remote control for CycleOps VirtualTraining to allow the rider to change the ride view, mark intervals, pause and virtually change gears when using with 400 series or Phantom 5 Indoor Cycle. - Compatible with tablet and mobile devices via Bluetooth Smart only (iPad 3 or newer, iPhone 4s or newer.) - Compatible with PC via ANT+ or Bluetooth Smart (Bluetooth Smart connection Windows 8 or ANT+ connection requires ANT+ dongle/antenna.)
Kreitler Replacement Belt
$19.95
- Replacement belt - Select model based on model/roller size and belt size
Tacx Trainer Tire 27.5-inch
$49.99
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
Robert Axle Project Trainer Thru Axle for Cervelo R.A.T. Bikes
$80.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. This axle will replace the R.A.T. axle found on all Cervelo R.A.T. equipped bikes. In addition to this axle, we include our replacement derailleur hanger with traditional threads. This axle combined with the replacement derailleur hanger will provide a complete threaded thru-axle system. Our derailleur hanger matches the geometry and construction of the stock derailleur hanger in every way for crisp shifting performance. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Elite Freehub SRAM XD/XDR
$79.99
- Sram XD and XDR freehub for Direct Drive trainers (Drivo and Direto's family, Suito, Turno, Kura, Turbo Roteo and Volano). - Compatible with 12 speed cassette.
Saris Trainer Clutch Knob Upgrade/Replacement Kit
$29.99
- Includes clutch knob and L-bolt - Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer - Watch our video to learn more
Saris Mag+ Shifter
$29.99
Adjust resistance on Mag trainer without leaving the saddle. - Quick Release mounting system fits most stems. - For use with the Mag bike trainer only
Kinetic Shallow Cone Cups
$20.00
This cone cup is the mounting solution for carbon Trek Speed Concept frames that require a smaller cone cup on the drive side of the trainer than the pre-installed version. - Not compatible with Rock and Roll trainers - This cone cup's smaller outside diameter fits makes it compatible with carbon Trek Speed Concept bikes (aluminum Speed Concept bikes are compatible with the Standard Cone Cup) - Use this cone cup on the drive-side of the trainer (it is not necessary to replace both cone cups)
Robert Axle Project Trainer Thru Axle for Focus R.A.T. Bikes
$64.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is specific to bikes with Focus R.A.T. thru-axles and 12 x 142. Includes a replacement R.A.T. nut. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end, and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Tacx USB ANT+ Antenna
$69.99
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
Tacx Trainer Bag
$99.99
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.
Wahoo KICKR Axis Feet
$79.99
Whether mashing or spinning, riding in the saddle or out, KICKR’s AXIS feet let cyclists of all types customize the ride feel, enhance feedback and offer a more realistic training experience to match their unique riding style. - Active feedback - A tuned ride  - Reduce fatigue, go longer  - KICKR AXIS feet create a realistic ride feel providing up to 5 degrees of side-to-side movement.
Elite SU-STA Front Wheel Support
$39.99
This height-adjustable front wheel support can simulate both flat terrain and slopes perfectly - Unique design with 5 levels lets you adjust the height of your front wheel to simulate hill climbs up to 6% - Anti-slip rubber feet eliminate handlebar vibrations - Internal design that guarantees maximum wheel stability - Suitable for both road and MTB - You can attach to the trainer frame when not in use for easy transport and storage
CycleOps Classic Series Trainer Thru Axle Adapter
$59.99
Cycleops' Thru Axle Adapter kit for the Classic Series trainers consists of an axle, washers, end caps with bolts, and a shorter version of their bolt-action slider. The axle is threaded on both sides to fit Syntace- and Maxle/ABP-style thru-axle systems.
Robert Axle Project Trainer Thru Axle for Surly MDS/Gnot-Boost
$54.00
Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Elite Misuro B+ Sensor
$89.99
Misuro B+ is the perfect sensor to enhance your training sessions with Elite home trainers and rollers. This ANT+ and Bluetooth Smart Speed/Power/Cadence sensor monitors indoor training sessions via smartphone, tablet, cycle computer, or compatible GPS devices when installed on an Elite trainer. - Reads data based on the type of trainer used. - Uses ANT+ and Bluetooth Smart protocols that are compatible with many devices. - When paired with the My E-Training Software, it turns your Elite trainer into an advanced digital instrument that displays and manages fundamental training data.
Page 1 of 1