If you've heard the expression "to Stan's a tire," it's referring to Stan's Tire Sealant. Put the recommended amount in your road, mountain and cyclocross tires and it will stop slow leaks and seal small punctures. Rim strips and valves not included.
$35.90 - $79.00
- Just like the Original version except specially designed for FatBike applications - 2-ply rubber shield fits between tire and tube to prevent flats - Fits both 26-inch and 29-inch tires
A properly set up tubeless fatbike tire is like the holy grail of suppleness and, until now, we've forced you all to piecemeal together a tubeless kit for your Other Brother Darryl rims (Sorry about that. It won’t happen again, we promise… probably). But now you don’t have to do that anymore because our Tubeless Kit has everything you need to ditch your fat tubes. It comes with two of our nylon rim strips, a roll of Whisky Parts Co. tubeless tape, two tubeless valves, and two Problem Solvers Super P-Nuts. Just add your favorite sealant and let ‘er rip.
Tubeless valves for use with Whisky Tubeless rims and most other systems. - Steel valve stems for use with Whisky tubeless rims and most others - 35mm length - Fits up to an 8mm valve hole - Removable valve core - Sold as a pair
- Specific DT-Swiss tubeless ready valve stems for tubeless applications
The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.
$5.99 - $8.99
Bringing Lezyne's Metal Kit along is the difference between being stranded and making it home. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a waterproof aluminum box that fits neatly in a seat bag, jersey pocket or hydration pack.
$39.00 - $41.00
All the pieces needed for tubeless tire setup on compatible rims. - Includes Rim Tape, 2 Universal Valves & 1 Valve Core Wrench
$9.00 - $12.00
Zipp's Valve Extension extends your threaded Presta valve to accommodate deep dish rims. Use these extenders with your favorite Zipp wheels to make short work of pumping up your tires.
- High performance, professional tubular glue that dries rapidly - Each tube is usually adequate for gluing two tubular tires - Law prohibits ORM-D materials from shipping by air
If you've heard the expression "to Stan's a tire," it's referring to Stan's Tire Sealant. Put the recommended amount of this liquid sealant in your road, mountain, and cyclocross tires and it will stop slow leaks and seal small punctures.
$20.00 - $22.00
- Fully removable aluminum valve - Anodized red color - Intended for use with 320 tpi Vittoria tubular tires, Rubino Pro inner tubes, and latex inner tubes - 42mm, 60mm, 80mm, and 110mm lengths - Sold as a pair
Continental's Easy Tape High Pressure Rim Strips come in sizes to fit 700c and 650c road rims and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes them quick and easy to install. Just stretch them over your rims and let them snap in place! They are also made specifically for when you're running extreme pressures and can handle up to 220 psi. Each box contains a pair of rim strips.
Continental's Valve Extenders are made of durable aluminum and come in four sizes so you can attach your pump to your valve, no matter how deep your rims are.
$16.00 - $24.00
- 2-ply rubber shield fits between tire and tube to prevent flats
$8.00 - $16.00
Whisky Parts Co. Tubeless Rim Tape.
$19.00 - $25.00
No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes. - Available in a number of lengths and colors to perfectly fit your rims and your sense of style. - Includes two valves
$8.00 - $50.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
This is Continental's glue for gluing tubular ("sew-up") tires on aluminum tubular rims. The container has a brush built into the screw-on cap for easy glue application. You get enough glue to install about 12 tires.
Tubeless set up should be a "set it and forget it" affair. So why are there so many tubeless valves out there with weak construction and poor design? SPANK's tubeless valves are constructed of durable brass material, and a tapered round rubber base which fits a wide range of rim designs. Extra long shafts accommodate even the deepest well rims and most troublesome of pumps. Sealed removeable valve cores for sealant injection, make set up or topping up a breeze. - Material: Brass shaft, rubber plug - Weight (g): ±18/set - Length (mm): 40 shaft (55 total length) - Features: 2 pcs per set, removable valve core for sealant injection
Continental's Easy Tape Rim Strips are 20mm wide and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes they quick and easy to install. Just stretch them over your rims and let them snap in place! Each box contain a pair of rim strips.
$10.99 - $16.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
• Synthetic elastomer gasket with 2X the holding power and 5X wear resistance of traditional gasket materials • Two stage seal design, improves sealing and stability on all presta valve stems • Adjustable compression, user can tighten the cap to increase holding power by 4X and compensate for wear •15 degree stem angle reduces stress on the valve stem from pump hose • 12.0g
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal
$8.99 - $39.99
A new standard in tubeless sealant. Finish Line Tubeless Tire Sealant, featuring Fiberlink technology, will not cure inside the tires and doesn’t need to be refreshed every few months to maintain effectiveness. This sealant will last the entire usable life of the tire. Since there is no liquid latex or ammonia in Finish Line sealant, it is naturally non-toxic, hypoallergenic and safe for carbon fiber rims. Additionally, Finish Line Tubeless Tire Sealant cleans up easily with water – no more scrubbing or scraping cured latex from tires and rims. Fiberlink technology makes this possible. Utilizing DuPont Kevlar fibers, Fiberlink seals are extremely robust once they plug a hole. When a puncture happens, fibers rush into the wound and quickly stop air loss. As the tire flexes while it is ridden, the Fiberlink mesh tightens and reinforces itself, creating a confidence-inspiring seal that will last ride-after-ride. - Non-latex ammonia-free formulation - Kevlar reinforced Fiberlink mesh seal - Seals up to 1/4" punctures - Can be used in extreme temperatures, down to -10 degrees Fahrenheit
Challenge's Valve Extenders screw onto the end of Presta valves to make the valves 42mm longer so that the valves will protrude through wheels with tall rims far enough to be able to attach your pump and inflate the tires. You get two extenders and a wrench for them.
This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.
Those guys who said "Tubeless tires never get punctures"? They lied. The Blackburn Plugger Tubeless Tire Repar Kit is a quick, one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat. Mount it to your frame, tape it to your top tube, or strap it to your ankle like a shark knife. Just keep it close and it'll get you out of trouble. Pronto. - Stores ten plugs. - 27g tool only 47g tool with strap
$11.99 - $15.00
The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.
$9.00 - $12.00
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
Page 1 of 2 Next page